Handleiding
Je bekijkt pagina 24 van 32
Other features
TEMP SENSING feature(On some models)
NOTE:This feature can be activated from the remote
control ONLY. There is no indicator light on the
control panel. The remote control serves as a remote
thermostat allowing for the precise temperature
control at its location.
To activate the Temp Sensing feature, point the rem-
ote control towards the unit and press the I SENSE
button. The remote control will send this signal to the
Operation Instructions
COOL operation
· Press the "MODE" button until the "COOL"
indicator light comes on.
· Press the ADJUST buttons "UP" or "DOWN" to
select your desired room temperature. The temp-
erature can be set within a range of
16°C/60°F to
30°C/86°F
.
· Press the "FAN SPEED" button to choose the fan
speed.
HEAT operation(cooling only models without)
· Press the "MODE" button until the "HEAT"
indicator light comes on.
· Press the ADJUST buttons "UP" or " DOWN" to
select your desired room temperature. The tempe-
rature can be set within a range of
16°C/60°F to
30°C/86°F
.
· Press the "FAN SPEED" button to choose the fan
speed.
DRY operation
· Press the "MODE" button until the "DRY" indi-
cator light comes on.
· Under this mode, you cannot select a fan speed.
The fan motor operates at AUTO speed.
· Keep windows and doors closed for the best de-
humidifying effect.
TIMER operation
· When the unit is on, press the Timer button will
initiate the Auto-off stop program, the TIMER OFF
indicator light illuminates. Press the UP or down
button to select the desired time. Press the TIMER
button again within 5 seconds, the Auto-on start
program is initiated. And the TIMER ON indicator
light illuminates. Press the up or down button to
select the desired Auto-on start time.
· When the unit is off, press the Timer button to
initiate the Auto-on start program, press it again
within 5 seconds will initiate the Auto-off stop
program.
· Press or hold the UP or DOWN button to change
the Auto time by 0.5 hour increments, up to 10
hours, then at 1 hour increments up to 24 hours.
The control will count down the time remaining
until start.
· The system will automatically revert back to
display the previous temperature setting if there is
no operation in a 5 seconds period.
· Turning the unit ON or OFF at any time or adju-
sting the timer setting to 0.0 will cancel the Auto
Start/Stop timer program.
AUTO operation
· When you set the air conditioner in AUTO mode,
it will automatically select cooling, heating(cooling
only models without), or fan only operation depen-
ding on what temperature you have selected and
the room temperature.
· The air conditioner will control room temperature
automatically round the temperature point set by you.
· Under AUTO mode, you can not select the fan
speed.
Operating
Instructions
FAN operation
· Press the "MODE" button until the"FAN " indi-
cator light comes on.
· Press the "FAN SPEED" button to choose the fan
speed. The temperature can not be adjusted.
air conditioner until press the I SENSE button again.
If the unit
does not receive the Temp Sensing signal
during any 7 minutes interval, the unit will exit the
Temp Sensing mode.
NOTE: This feature is unavailabe under FAN or DRY
mode.
Page 20
Bekijk gratis de handleiding van Keystone KSTAP121HINV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Keystone |
| Model | KSTAP121HINV |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 3804 MB |
