Key Digital KD-PS22UTx handleiding
Handleiding
Je bekijkt pagina 9 van 20
7
Option 3: Control via professional control system
KD-PS22UTx allows control over TCP/IP interface for bi-directional communication. You may connect to
the LAN port of the KD-PS22UTx, KD-X100MRx, or KD-UPS52U to deliver network connectivity to the Key
Digital devices.
Default IP Address: 192.168.1.239, Port 23
› For TCP/IP control, the default static IP address is 192.168.1.239, with port 23
› RS-232 connection is used for control pass-thru to connected devices, not for unit control of the
KD-PS22UTx
› For the past 10 years, most Key Digital switches have supported a standard audio+video switching
command. KD-PS22UTx is also controllable by this command, so if you have previously integrated
Key Digital switches by third-party control systems you may have success using the same driver/
module.
» Switching – Video + Audio together (two commands supported)
» SPO01SIyy - yy = input number (01-02)
» SPOSIyy - yy = input number (01-02)
Connections, Buttons, and LEDs
› HDMI Inputs: Using an HDMI cable, connect your HDMI sources.
» Supports up to UHD/4K @ 50/60 fps [4:4:4], 18Gbps
» See Supported Standard 4K Video Formats table below
» Supports HDR10 and Dolby Vision
» Compliant with HDCP 2.2 and previous
» Supports lossless compressed audio formats including
Dolby
®
TrueHD, Dolby
®
Digital Plus, DTS-
HD Master Audio
™
, and Dolby
®
Atmos
» Does not support CEC pass through from display connected to Rx unit / presentation switch
» Active light to the left of each port illuminates when there is an active HDMI signal passing through.
Bekijk gratis de handleiding van Key Digital KD-PS22UTx, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Key Digital |
| Model | KD-PS22UTx |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4884 MB |
