Kernau KSSI 3101 C handleiding
Handleiding
Je bekijkt pagina 17 van 40
17
CHAPTER 5. WATER TANK FILLING
Unplug the iron before filling the water tank.
Hold the steam iron in horizontal position.
Slowly pour water through the water inlet.
Do not fill higher than mark on the water tank, in order to avoid spilling out of water.
NOTE:
Your steam iron is designed to use tap water, however, if the water is very hard in your area, it
is advisable to use distilled water or purified water.
The water tank should be emptied after each use.
NOTE:
If you empty the water tank after using, set the steam iron upright position on its heel rest, plug
it in and set the temperature control dial to the maximum position, heat for 2 minutes. Unplug
the steam iron from the power supply.
CHAPTER 6. DRY IRONING
The steam iron can be used on the dry setting with or without water in the water tank, it is best to avoid
having the water tank full while dry ironing.
Turn the steam regulator to the “OFF” position.
Select the best suited temperature for the fabric to be ironed.
CAUTION:
If the steam iron has been used for a long time, it is hot and there is no water. Do not refill it
with water until the steam iron cools down.
CHAPTER 7. SPRAYING
As long as there is enough water in the water tank, you may use the spray button at any temperature setting
during steam or dry ironing.
Press the spray button several times to activate the pump while you are ironing.
CHAPTER 8. STEAM IRONING
Set the temperature control dial to the ”...” or “MAX” position.
Set the steam regulator to the desired position.
CAUTION:
Avoid coming in contact with ejected steam.
Bekijk gratis de handleiding van Kernau KSSI 3101 C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kernau |
| Model | KSSI 3101 C |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3566 MB |
