Handleiding
Je bekijkt pagina 36 van 40
36
CHAPTER 11. INSTALLATION
LOCATING THE FIXING BRACKETS
• The unit should be placed on a stable, smooth surface (use the packaging). Do not apply force
onto the controls protruding from the hob.
Stretch out the supplied seal along the underside edge of the hob, ensuring the ends overlap.
SELECTION OF INSTALLATION EQUIPMENT
Cut out the work surface according to the sizes shown in the drawing. For the purpose of installation and
use, a minimum of 5 cm space shall be preserved around the hole.
Be sure the thickness of the work surface is at least 30 mm. Please select heat-resistant work surface material
to avoid larger deformation caused by the heat radiation from the hotplate. As shown below:
L(mm) W(mm) H(mm) D(mm) A(mm) B(mm) X(mm)
290 520 60 55 265 495
50
mini
A(mm) B(mm) C(mm) D E
760 35 mini 20 mini Air intake Air exit 5 mm
Bekijk gratis de handleiding van Kernau KIH 3212-2B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kernau |
| Model | KIH 3212-2B |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4200 MB |
