Handleiding
Je bekijkt pagina 34 van 40
34
Cooking zones 2 zones
Supply Voltage 220-240V
Installed Electric Power 3500W
Product size LxWx H(mm) 290X520X60
Building-in Dimensions Ax B (mm)
265X495
NOTE
The red dot next to power level indicator will illuminate indicating that zone is selected.
ATTENTION
The red dot next to power level indicator will illuminate indicating that zone is selected.
1. When cooking timer expires, the corresponding cooking zone will be switch off automatically.
Other cooking zone will keep operating if they are turned on previously.
2. When using “the timer as an alarm” and “the timer to swith off the zones ” together ,the display
will show the remaining time of alarm as first priority.Press cooking zone to show the remaining
time of switch off timer.
CHAPTER 9. FAILURE DISPLAY AND INSPECTION
If an abnormality comes up, the induction hob will enter the protective state automatically and display
corresponding protective codes::
Error message Possible cause What to do
No pot or pot not suitable Replace the pot
ERO3
Water or pot on the glass over the
control
Clean the user interface
F1
The connection between the display
board and the left mainboard is fail
1. Connection cable not correctly plugged
or defective;
2. Replace the coil sensor if connection
cable is ok
3. Replace the mainboard or power if coil
sensor are OK.
F3E
Coil temperature sensor failure.
(the cooking zone which indicator
showing `E’)
Replace the coil sensor
F4E
Mainboard temperature sensor
failure (the cooking zone which
indicator showing `E’)
Replace the mainboard
E1E
Temperature sensor of the ceramic
glass plate is high
Please restart after the induction hob cools
down
E2E
Temperature sensor of the IGBT is
high
Please restart after the induction hob cools
down
E3E
Abnormal supply voltage (too high)
Please inspect whether power supply is
normal; Power on after the power supply
is normal
Error message Possible cause What to do
E4E
Abnormal supply voltage (too low)
Please inspect whether power supply is
normal; Power on after the power supply
is normal
E5E
Temperature sensor failure (the
cooking zone which indicator
showing `E’)
Connection cable not correctly plugged or
assemble defective
Bekijk gratis de handleiding van Kernau KIH 3212-2B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kernau |
| Model | KIH 3212-2B |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4200 MB |
