Kernau KFWM 7412 I handleiding
Handleiding
Je bekijkt pagina 70 van 148
70
TROUBLE CODE POSSIBLE FAULT WHAT TO DO
E01
The door of your machine is not
shut properly.
Shut the door properly until you
hear a click. If your machine
persists to indicate fault, turn off
your machine, unplug it and
contact the nearest authorised
service agent immediately.
E02
The water pressure or the water
level inside the machine may be
low.
Check the tap is fully turned on.
Mains water may be cut-off. If
the problem still continues, your
machine will stop after a while
automatically. Unplug the
machine, turn off your tap and
contact the nearest authorised
service agent.
E03
The pump is faulty or pump filter
is clogged or electrical connection
of the pump is faulty.
Clean the pump filter. If the
problem persists, contact the
nearest authorised service agent
(*)
E04
Your machine has excessive
amount of water.
Your machine will discharge
water by itself. Once the water
has drained, turn off your
machine and unplug it. Turn off
the tap and contact the nearest
authorised service agent.
(*) See the chapter regarding maintenance and cleaning of your machine.
CHAPTER 10. AUTOMATIC FAULT WARNINGS AND WHAT TO DO
Your Washing Machine is equipped with a built-in fault detection system, indicated by a combination of
flashing wash operation lights. The most common failure codes are shown below.
Bekijk gratis de handleiding van Kernau KFWM 7412 I, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kernau |
| Model | KFWM 7412 I |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 15726 MB |
