Kernau KDI 4753 SAD handleiding
Handleiding
Je bekijkt pagina 66 van 68
66
The installation and repairing procedures should always carried out by the Authorised Service Agent in order
to avoid possible risks. The manufacturer shall not be held liable for damages that may arise from procedures
carried out by unauthorised persons. Repairs may be carried out by technicians only. If a component has to
be replaced, ensure that only original spare parts are used.
Improper repairs or use of non-original spare parts may cause considerable damage and put the user at
considerable risk.
Contact information for your customer service can be found on the back of this document.
Function-relevant genuine spare parts according to the corresponding Ecodesign order can be obtained from
AUTOMATIC FAULT WARNINGS AND WHAT TO DO
TROUBLE CODE POSSIBLE FAULT WHAT TO DO
FF
Water inlet system failure.
Make sure the water inlet tap is
open and water is flowing.
Separate the inlet hose from the
tap and clean the filter of the
hose.
Contact for service if the error
continues.
F5
Pressure system failure. Contact for service.
F3
Continuous water input.
Close the tap and contact for
service.
F2
Inability to discharge water.
Water discharge hose and filters
may be clogged.
Cancel the program.
If the error continues, contact
for service.
F8
Heater error. Contact for service.
F1
Overflow
Unplug the machine and close
the tap.
Contact for service.
F7
Overheating Contact for service.
F9**
Divisor position error. Contact for service.
F6
Faulty heater sensor. Contact for service.
HI
High voltage failure. Contact for service.
LO
Low voltage failure. Contact for service.
**Model Depending
Bekijk gratis de handleiding van Kernau KDI 4753 SAD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kernau |
| Model | KDI 4753 SAD |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 8636 MB |
