Kernau KDI 4753 SAD handleiding
Handleiding
Je bekijkt pagina 64 van 68
64
WARNING RISK OF CUTS!
When cleaning the waste water pump, ensure that you do not injure yourself on pieces of
broken glass or pointed implements.
In this case:
1. First always disconnect the appliance from the power supply.
2. Take out baskets.
3. Remove the filters.
4. Scoop out water, use a sponge if required.
5. Check the area and remove any foreign objects.
6. Install filters.
7. Re-insert baskets.
CHAPTER 9. TROUBLESHOOTING
FAULT POSSIBLE CAUSE TROUBLESHOOTING
The programme does
not start
Your Dishwasher is not
plugged in
Plug your Dishwasher in
Your Dishwasher is not
switched on
Switch your Dishwasher on by
pressing the On/Off button
Fuse blown Check your indoor fuses
Water inlet tap is closed Turn on the water inlet tap
Your Dishwasher door is open Close the Dishwasher door
Water inlet hose and machine
filters are clogged
Check the water inlet hose and
machine filters and make sure
they are not clogged
Water remains inside
the machine
Water drain hose is clogged or
twisted
Check the drain hose, then
either clean or untwist it
The filters are clogged Clean the filters
The programme is not finished
yet
Wait until the programme is
finished
Machine stops during
washing
Power failure Check mains power
Water inlet failure Check water tap
Shaking and hitting
noises are heard during
a wash operation
The spray arm is hitting the
dishes in the lower basket
Move or remove items blocking
the spray arm
Bekijk gratis de handleiding van Kernau KDI 4753 SAD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kernau |
| Model | KDI 4753 SAD |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 8636 MB |
