Kernau KDI 4753 SAD handleiding
Handleiding
Je bekijkt pagina 62 van 68
62
Infoled 2.1 (Model Dependent)
Infoled that is positioned on the bottom side of the dishwasher shines a light on to floor to indicate the
current status of the dishwasher during washing.
LED Indicator State of the Machine
Red, continuous The machine is running a program.
Red, flashing A program is cancelled.
Red, flashing rapidly
The machine has a fault. Refer
to section „Automatic fault
warnings and what to do”.
Green, continuous A program is finished.
CHAPTER 8. CLEANING AND MAINTENANCE
Cleaning your dishwasher is important to maintain the machine’s service life. Make sure that the water
softening setting (If available) is done correctly and correct amount of detergent is used to prevent limescale
accumulation. Refill the salt compartment when the salt sensor light comes on. Oil and limescale may build
up in your dishwasher over time.
If this occurs:
•
Fill the detergent compartment but do not load any dishes. Select a programme which runs
at high temperature and run the dishwasher empty. If this does not clean your dishwasher
sufficiently, use a cleaning agent designed for use with dishwashers.
• To extend the life of your dishwasher, clean the appliance regularly on each month.
• Wipe the door seals regularly with a damp cloth to remove any accumulated residue or foreign
objects.
FILTRES
Clean the filters and spray arms at least once a week. If any food waste remains or foreign objects on the
coarse and fine filters, remove them and clean them thoroughly with water.
a) Micro Filter
b) Coarse Filter
c) Metal Filter
Bekijk gratis de handleiding van Kernau KDI 4753 SAD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kernau |
| Model | KDI 4753 SAD |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 8636 MB |
