Kernau KDI 4753 SAD handleiding
Handleiding
Je bekijkt pagina 43 van 68
43
WARNING
Run water through the new hose before connecting.
WARNING
Connect the hose directly to the water inlet tap. The pressure supplied by the tap should be a
minimum of 0.03 MPa and a maximum of 1 MPa. If the pressure exceeds 1 MPa, a pressure relief
valve must be fitted between the connection.
WARNING
After the connections are made, turn the tap on fully and check for water leaks. Always turn off
the water inlet tap after a wash program has finished.
RISK OF ELECTRIC SHOCK
An Aquastop water spout is available with some models. Do not damage it or allow it to
become kinked or twisted.
DRAIN HOSE (MODEL DEPENDING)
Connect the water drain hose directly to water drain hole or to the sink outlet spigot.
This connection should be minimum 50 cm and maximum 110 cm from floor that dishwasher is placed.
Bekijk gratis de handleiding van Kernau KDI 4753 SAD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kernau |
| Model | KDI 4753 SAD |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 8636 MB |
