Handleiding
Je bekijkt pagina 31 van 36
31
INSTALLING GREASE MESH FILTERS
• To install filters for the following four steps.
— Angle the filter into slots at the back of the hood.
— Push the button on handle of the filter.
— Release the handle once the filter fits into a resting position.
— Repeat to install all filters.
CARBON FILTER-not supplied
Activated carbon filter can be used to trap odors. Normally the activated carbon filter should be changed at
three or six months according to your cooking habit. The installation procedure of activated carbon filter
is as below.
1. Before installing or replacing the carbon filters, disconnect the mains power to the unit.
2. Press the filter lock and remove the mesh filter.
3. Turn the carbon filter on both sides of the motor anti-clockwise. Replace the carbon filters with
the new carbon filters.
4. Place the mesh filter.
5. Connect the power supply to the wall socket.
NOTE:
• Make sure the filter is securely locked. Otherwise, it would loosen and cause dangerous.
• When activated carbon filter attached, the suction power will be lowered.
Bekijk gratis de handleiding van Kernau KBH 0386 B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kernau |
| Model | KBH 0386 B |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 3731 MB |
