Kern OBE 101 handleiding
Handleiding
Je bekijkt pagina 13 van 27
OBE-1-BA-e-2012 12
4.4 Condenser
The condenser is firmly fixed onto a holding ring (condenser holder) underneath the
microscope stage. The lever for the aperture diaphragm is directed towards the front.
There is the ability to adjust the height of the condenser, but not to centre it. We
recommend that you use the course adjustment knob to bring the specimen stage to
its uppermost position when you need to remove the condenser. Then use the focus
dial of the condenser to move the condenser holder to a low position. In this way the
condenser can be taken off after loosening the three screws on the holding ring.
If the microscope has no focus dial for the condenser, the height adjustment is
done by turning the condenser on its vertical axis (see illustration).
You should avoid touching the optical lenses with bare fingers.
Bekijk gratis de handleiding van Kern OBE 101, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kern |
| Model | OBE 101 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4742 MB |
