Kenwood TK-D740H handleiding
Handleiding
Je bekijkt pagina 20 van 26
20
ADVANCED OPERATIONS
EMERGENCY CALLS
If your transceiver has been programmed with the Emergency function, you can
make emergency calls.
1 Press and hold the key programmed as [Emergency].
• Ask your dealer for the length of time necessary to hold this key before the
transceiver enters Emergency mode.
• When the transceiver enters Emergency mode, it will change to the
Emergency channel and begin transmitting based on how it is set up by
your dealer.
2 To exit Emergency mode, press the [Emergency] key again.
• If the Emergency mode completes a preset number of cycles, Emergency
mode will automatically end and the transceiver will return to the zone and
channel that was in use before Emergency mode was entered.
Note:
◆ Your dealer can set the transceiver to emit a tone when transmitting in Emergency
mode.
◆ Your dealer can set the transceiver to emit tones and received signals as normal, or
mute the speaker during Emergency operation.
Lone Worker Mode
Lone Worker Mode is a safety feature built into the transceiver. If the transceiver is
not operated for a pre-programmed period of time, the transceiver will emit a tone
and automatically enter Emergency operation.
Press the key programmed as [Lone Worker] to toggle the Lone Worker function
ON or OFF.
• “Ln” appears on the display for 1 second.
Bekijk gratis de handleiding van Kenwood TK-D740H, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kenwood |
| Model | TK-D740H |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1611 MB |
