Kenwood CX-DAB1 handleiding
Handleiding
Je bekijkt pagina 4 van 36
4
|
English
150 mm
70 mm *
1
Antenna film A
Earth sheet
Earth sheet
Amplifier B
Amplifier B
Front pillar
When installing the antenna on the left side
When installing the antenna on the right
side
Antenna film A
150 mm
70 mm *
1
Determining the antenna installation location
Antenna Installation
1 Check the installation location.
2 Wipe the area where antenna film A,
amplifier unit B, and earth sheet are
pasted with the included cleaner D.
The coating on the metal surface need not
be removed.
■
Wait until the glass surface is completely
dry before pasting.
■
If the glass surface is cold, such as during
winter, warm it with defroster or dryer.
3 Remove the separator (tag I) of antenna
film A horizontally and paste the
antenna on the front glass.
■
Remove the separator gently.
■
Do not touch the pasting surface
(adhesive side) of the antenna film A.
4 Remove the separator (tag II) of
antenna film A vertically and paste
the antenna gently while applying
pressure.
5 After pasting, rub the element in the
glass surface in the direction of the
arrow shown in the figure to bond it.
6 Remove the application film (tag III).
■
Do not touch the feeder terminal of the
element. Also, do not apply any glass
cleaner.
Feeder terminal
• *
1
Where the earth sheet of Amplifier B can be pasted on the metal part of the front pillar.
Bekijk gratis de handleiding van Kenwood CX-DAB1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kenwood |
| Model | CX-DAB1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3984 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 45 g |
| Snoerlengte | 3.5 m |
| Ondersteuning voor plaatsing | Raam |
| Type product | Antenne voor autoradio's |
