Handleiding
Je bekijkt pagina 25 van 80
9
5.6 Pairing the Party Speakers with a terminal device
The cordless data transmission via the BLUTOOTH protocol allows for the loudspeaker system to be
connected to the compatible devices. The maximum operating range of the data transmission is 10
m. Impediments and other electronic devices can impair the signal transmission and reduce the oper-
ating range. To pair the loudspeaker with your terminal device please proceed as follows:
• Switch on the BLUETOOTH Loudspeaker.
• Now open the BLUETOOTH settings on the terminal device to be paired and start searching for
available BLUETOOTH devices there. Select "KENWOOD AS-P200BT" and start the pairing
process.
• Following the successful pairing the loudspeaker emits a signal tone, and the BLUETOOTH symbol
on the Display stops flashing. Now the music playback can be controlled via the terminal.
• Hold and press the<Play/Pause> button for 8 seconds to interrupt the BLUETOOTH connection.
5.7 True-Wireless Stereo function (TWS)
This function makes it possible to pair two similar loudspeakers to achieve a stereo effect. For this
please proceed as follows:
• Place the two Party Speakers at a distance of 1 meter from each other and switch both of them on.
• On the Party Speaker which is to take over the music control press the <EQ>button for approx. 2
seconds. A signal tone sounds, which a few seconds later is repeated on the second Party Speaker.
Now the devices are paired.
• The volume, the setting of the sound modes and the effect lighting of both devices are
synchronised.
• If one of the devices is switched off the second device also switches off automatically.
Next time they are switched on the TWS function is reactivated.
• If you want to unpair, press the <EQ> button on one of the Party Speakers for 2 seconds.
5.8 Setting the effect lighting
The Party Speaker offers a built-in effect lighting which is synchronised with the music beat. You can
call up 4 different effects”ON1” to “ON4”.
The effects vary depending on the type of the music and the volume.
• Please press the <EFFECT LIGHTING> button, to switch between the various modes. The”OFF”
mode switches the lighting off temporarily.
5.9 Microphone and Echo function
A commercially available microphone with 6.35 mm jack plug can be connected to the input <MIC>
on the back side. This way you can sing along to the music or make announcements. You can control
the microphone level in proportion to the total volume, an echo effect can be mixed in.
• Please press 1 x the<MIC> button and then use<+> or <-> to set the microphone level.
The control range goes from “H00” (Microphone mute) to”H30”.
• Please press 2 x the<MIC> button and then use <+> or <-> to set the echo effect.
The control range goes from “E00” (Echo off) to “E30”.
Bekijk gratis de handleiding van Kenwood AS-P200BT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kenwood |
| Model | AS-P200BT |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 5416 MB |
