Kenwood Abbey Lux ZJP05 handleiding
Handleiding
Je bekijkt pagina 5 van 14
English
5
l
Rinse out with fresh water if the
kettle has not been used for
more than 2 days.
2 Close the lid by pushing down
on the lid.
3 Plug in and switch on. The
power on light
4
will come on.
4 Your kettle will boil and switch
off automatically. To re-boil,
wait a few seconds - the on/off
switch needs time to reset.
Note - To interrupt the boiling
ensure that the switch is in the
off position before removing
from the powerbase.
l
If you experience problems
with your kettle switching on
and off during use or switching
off before boiling, check that
the flat element is free from
scale - see “descaling”.
l
Your kettle is fitted with a filter
to hold back limescale particles.
l
If you find drops of water under
your kettle, do not worry - it is
just condensation.
Boil-dry protection
l
If you switch on with too little
water, your kettle will cut
out automatically. Switch off,
remove from the powerbase
and let it cool down before
re-filling. When it has cooled
down, the switch will reset itself.
Care and cleaning
l
Before cleaning, unplug your
kettle and let it cool down.
The outside and powerbase
l
Wipe with a damp cloth, then
dry. Do not use abrasives -
they will scratch the metal and
plastic surfaces.
The inside
l
Wipe with bicarbonate of
soda on a damp cloth. Rinse
thoroughly.
l
Even though your kettle comes
with a filter, you still need to
clean the inside (and the filter)
regularly.
The filter
(B)+(C)
1 Open the lid.
2 Unclip and slide out the filter
(B).
3 Either rinse under the tap
or use a soft brush or when
descaling your kettle, drop the
filter in too. Rinse thoroughly.
4 Replace the filter by locating
the front of the filter into the
spout area then clip into place
(C).
Descaling
l
Regular descaling of the flat
element will improve the
performance of your kettle.
If the kettle is not descaled
regularly the build up of
limescale may result in the
following:
l
problems may be
experienced with the kettle
switching on and off during
use or switching off before
boiling.
l
the kettle may take longer to
boil.
l
the flat element may be
damaged.
Please note: Failure to descale
your kettle may invalidate your
guarantee.
l
When limescale starts to build
up on the heating element, buy
a suitable descaler and descale
your kettle. After descaling, boil
with fresh water several times
and discard. Clean any descaler
off the kettle - it can damage
the parts.
l
Some regions of the country
have chalky water. This makes
boiled water look cloudy and
leaves a deposit on the side of
the kettle. This is normal but
can be removed with regular
cleaning.
l
Alternatively, to reduce
limescale build up, use filtered
water to fill your kettle.
Bekijk gratis de handleiding van Kenwood Abbey Lux ZJP05, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kenwood |
| Model | Abbey Lux ZJP05 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1640 MB |
