Kensington V18P01BP25EU handleiding

18 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 6 van 18
Operation
5
1
2
Charging the Vacuum
This cleaner uses a rechargeable 25.2V Lithium battery suggest to charge
fully before using for the first time. It takes approximately 3 hours.
1. Place the body of the cleaner onto a flat surface either a table or fit
into the wall bracket.
Fig. 1 Fig. 2
2.
Insert the adaptor cord into the DC jack at the end of the cleaner
handle and plug the adaptor into the mains supply socket (fig.1).
3.
The light indicator show the status (Fig 2):
Charging: Light 1 flash, light 2 off
Half charged: Light 1 on, light 2 flash
Fully charged: Light 1 & 2 on, then off in 10 mins
Low battery: Light 1 flash, light 2 off
Notes
Light indicator 1(Fig 2) will flash when the battery is running low
and needs to be recharged, If recharge not started, the vacuum
will power off.
Only charge or recharge the
vacuum indoors.
Do not recharge the battery when the air temperature is below
0°C or above 37°C.
Batteries become hot after heavy use and will become difficult to
charge. Allow to cool and wait about an hour between recharges.

Bekijk gratis de handleiding van Kensington V18P01BP25EU, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkKensington
ModelV18P01BP25EU
CategorieStofzuiger
TaalNederlands
Grootte2039 MB