Kenmore KW1090 handleiding
Handleiding
Je bekijkt pagina 16 van 72
- 16 -
Empty the dirty water tank
when the dirty liquid reaches the
"Max Fill" line and there is a loss
in suction. During normal use,
debris may accumulate in the
dirty water tank. In order to keep
the spot cleaner functioning
properly, rinse out the dirty water
tank with clean water after each
use.
1. Lift up the dirty water tank
from the side of the unit. A
security latch is positioned to
keep the dirty water tank in
position to avoid unintentional
release. The latch will
automatically release when the
tank is pulled upwards.
EMPTYING THE DIRTY WATER TANK
WARNING
Always disconnect the battery
pack from the spot cleaner
before performing any service
on spot cleaner.
2. Remove the dirty water tank
cover by undoing the dirty
water tank cover release.
Security
Latch
3. Empty the tank into a sink
or toilet. Rinse the tank
thoroughly with clean water.
If continuing to use after
emptying the dirty water tank,
be sure to dry the outside of
the tank before reinstalling.
4. Insert the locking tabs into the
slots of the dirty water tank
rst and then secure the dirty
water tank cover back into
place until a click is heard.
Bekijk gratis de handleiding van Kenmore KW1090, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kenmore |
| Model | KW1090 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7125 MB |
