Kenmore KW1050 handleiding
Handleiding
Je bekijkt pagina 12 van 60
- 12 -
6. Select the desired cleaning
mode by pressing the mode
button. Pressing the mode
button will switch the spot
cleaner into: Normal Mode
Heated Mode Normal Mode.
For ordinary stains, select the
Normal Mode. The normal mode
indicator will glow a steady
green light to indicate the status.
WARNING
Scalding Risk.
When in the Heated Mode,
do not touch the nozzle and
sprayed water with your hands.
WARNING
Personal Injury and Product
Damage Hazard
· When any abnormality/failure
occurs, stop using the product
immediately and disconnect
the power plug.
· DO NOT use outlets above
counters. Damage from cord
to items in surrounding area
could occur.
USING THE SPOT CLEANER
4. Plug the power cord into a
properly grounded outlet
located near the oor.
5. Press the power button to turn
the spot cleaner on. The spot
cleaner starts in normal mode
by default.
For stubborn stains, select the
Heated Mode. The heated mode
indicator will ash yellow while
the unit warms up. After about
15 seconds, the heated mode
indicator will stop ashing and
a steady green light will glow
to indicate the heated mode is
ready for use.
NOTE:
Cool water may spray
out of the hose before the hot
water is sprayed.
7. Hold the tool about 1 inch
over the stain to be cleaned.
Squeeze the spray trigger to
spray a generous amount of
cleaning solution over the
soiled area. Use the brush on
the tool to agitate stains by
scrubbing in a back and forth
motion.
Bekijk gratis de handleiding van Kenmore KW1050, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kenmore |
| Model | KW1050 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6129 MB |
