Kenmore BU3040 handleiding
Handleiding
Je bekijkt pagina 10 van 80
UPRIGHT MODE
NOTE:
Make sure the vacuum cleaner
is completely assembled. Do not operate
vacuum cleaner without dust bag in place.
NOTE:
Make sure the flexible hose is
installed correctly into the main body (page
8).
1. Release the handle by placing foot on
the nozzle and pull back to change
handle position.
2. Turn on the vacuum cleaner by pressing
the On/Off switch to the “I” position
for cleaning bare floors and small area
rugs.
NOTE:
The brushroll does not rotate
when the vacuum cleaner is in the “I”
position.
- 10 -
4. Plug the power cord plug into an outlet
located near the floor.
POWER CORD - RELEASE & USE
OPERATION MODES
WARNING
Electrical Shock and Personal Injury
Hazard
Wrapping the cord too tightly puts stress
on the cord and can cause cord damage.
A damaged cord is an electrical shock
hazard and could cause personal injury
or damage
5. Press the On/Off switch to turn the
vacuum cleaner on.
6. Once you have completed vacuuming,
press the On/Off switch; unplug the
power cord plug from the outlet.
7. To restore power cord after use, turn
upper cord hook to the upright position.
Then wrap cord loosely around cord
hooks.
On/Off
Switch
WARNING
Personal Injury and Product Damage
Hazard
· When any abnormality/failure occurs,
stop using the product immediately and
disconnect the power plug.
· DO NOT use outlets above counters.
Damage from cord to items in
surrounding area could occur.
Bekijk gratis de handleiding van Kenmore BU3040, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kenmore |
| Model | BU3040 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9465 MB |
