Handleiding
Je bekijkt pagina 13 van 26
START
The “START” Pad begins the oven function. If the
“START” pad is not pressed within 30 seconds after
pressing a function pad, the display will begin to flash
for 30 seconds, then 5 reminder tones will sound, and
“PUSH" icon and “On” icon will begin to flash
alternately on the display for 30 seconds. If the “START”
pad is not pressed the oven function will be canceled
and the display will return to showing the clock time.
TIMER
The timer can be set in hours or minutes up to 11 hours
and 59 minutes (in the 12-hour time mode; 23-hours and
59 minutes in the 24-hour time mode), and counts down
the set time programmed into the system. The timer does
not start or stop the oven.
LOCK CONTROLS
The Lock Controls function locks the control panel pads
from being used to avoid any unintended use of the cook
functions. When the control panel is locked, only the
Oven Light will function.
HOW TO SET THE TIMER
1. To set the Timer, press the “TIMER/CLOCK” pad. The
Timer indicator light will light up.
2. Next, the display will begin to flash, to set the desired
hour or minutes, press the “+ or –” pad.
3. Then press the “TIMER/CLOCK” pad to begin the
Timer.
4. When the set time ends, the end-of-cycle tones will
sound.
5. Press the “TIMER/CLOCK” pad to stop the timer and
the reminder tones.
OVEN TEMPERATURE FORMAT
1. The default temperature scale setting for the oven is
set to Fahrenheit.
2. When using the oven, the oven temperature on the
display will appear in Fahrenheit (F).
3. However, if you would like to change the temperature
scale to Celsius (C), please see directions below.
HOW TO CHANGE THE OVEN
TEMPERATURE SCALE TO CELSIUS:
1. To change the oven temperature scale to Celsius (C),
press the “BAKE” pad and hold for 3 seconds.
2. Next, the letter “C” will appear on the display for a
few seconds.
3. The “C” will disappear from the display, and the
clock time will reappear on the display indicating the
oven temperature scale has been switched.
4. When using the Bake function, the oven temperature
will now display the letter “C” next to the tempera-
ture.
To Lock/Unlock Control Panel:
1. To lock the control panel, press both the “+ and –”
pads at the same time and hold for three seconds,
then “LOC” icon will appear on the display and begin
to flash. Once “LOC” stops flashing, your control
panel is now locked.
2. To unlock the control panel, press both the “+ and –”
pads at the same time and hold for three seconds,
then “OPN” icon will appear on the display and begin
to flash. Once “OPN” icon stops flashing, your control
panel is now unlocked.
HOW TO CHANGE THE OVEN
TEMPERATURE SCALE BACK TO
FAHRENHEIT:
• To change the oven temperature scale back to Fahr-
enheit (F), repeat above steps 1-3. However, during
the adjustment the letter “F” will appear on the
display instead of a “C”.
If you would like to stop the Timer at any time, press
the “TIMER/CLOCK” pad twice.
NOTE
LOCK CONTROLS
LOCK CONTROLS FUNCTION DOES NOT LOCK
THE OVEN DOOR.
WARNING
EN-13
ELECTRONIC OVEN CONTROLS
Bekijk gratis de handleiding van Kenmore 92222, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kenmore |
| Model | 92222 |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 2826 MB |
