Handleiding
Je bekijkt pagina 52 van 173
52
ADJUST FLAME HEIGHT
Check and adjust the height of top burner flames. The cooktop "low" burner flame should
be a steady blue flame approximately 1/4" (6 mm) high. Propane gas flames have a slightly
yellow tip.
If burners do not light properly:
1. Turn burner control knob to the "OFF" position.
2. Check that the range is plugged in. Check that the circuit breaker has not tripped or the
household fuse has not blown.
3. Check that the gas shutoff valves are set to the "open" position.
4. Check that burner caps are properly positioned on burner bases.
To adjust standard burner:
IMPORTANT: Adjustments must be made with two other burners in operation on a
medium setting. This prevents the upper row of flames from being set too low, resulting in
the flame being extinguished when other burners are turned on.
The flame can be adjusted using the adjustment screw in the center of the valve stem. The
valve stem is located directly behind the control knob.
1. Light the burner and turn the knob to the lowest setting (MIN).
2. Pull and remove the control knob.
3. Insert a small, flat-blade screwdriver into the adjustment screw, and slowly turn the
screw until the flame appearance is correct.
• Open the valve more if the flames are too small or fluttered.
• Close the valve more if the flames are too large.
A Adjustment Screw
B Control Knob Stem
4. Replace the control knob.
5. Test and check the flame by turning the control knob from the lowest to the highest
settings.
Bekijk gratis de handleiding van Kenmore 76833, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kenmore |
| Model | 76833 |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 19808 MB |
