Handleiding
Je bekijkt pagina 37 van 173
37
Power Supply Location
IMPORTANT: An electrical outlet in the floor, may be either recessed or surface mounted,
but an electrical outlet in the wall must be recessed to make the connection. For Direct
Wiring, the electrical box should be mounted to the wall.
A 30" (76 cm)
B 11½" (29.2 cm)
C 6" (15.2 cm)
D 7¼" (18.4 cm)
E 3" (7.6 cm)
F 17½" (44 cm)
G Recommended Location for Electrical
Outlet
H Recommended Location for Gas Supply
Connection
VENTING REQUIREMENTS
IMPORTANT: This range must be exhausted outdoors unless you are using ductless venting.
Observe all governing codes and ordinances. Do not obstruct flow of combustion and
ventilation air.
• Do not terminate the vent system in an attic or other enclosed area.
• Use an approved vent cap for proper performance. If an alternate wall or roof cap is
used, be certain the cap size is not reduced and that it has a backdraft damper.
• Vent system must terminate to the outside unless you are using a ductless vent kit.
• Rigid metal vent is recommended. For best performance, do not use plastic or metal
foil vent.
• If a joist or stud must be cut, then a supporting frame must be constructed.
• The size of the vent should be uniform.
• The vent system must have a damper.
• Seal all joints in the vent system.
• Use caulking to seal exterior wall or roof opening around the cap.
• Determine which venting method is best for your application.
Bekijk gratis de handleiding van Kenmore 76833, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kenmore |
| Model | 76833 |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 19808 MB |
