Handleiding
Je bekijkt pagina 23 van 100
23
Changing the light
• Any replacement or maintenance of the LED lamps is intended to be made by the manufacturer, its
service agent or similar qualied person.
Connecting the appliance
After installing the appliance, connect the power plug into a socket outlet.
Electrical shock hazard
1. Plug into a grounded 3 prong outlet.
2. Do not remove the ground prong from the power cord plug.
3. Do not use an adapter.
4. Do not use an extension cord.
5. Failure to do so can result in death, re or electrical shock. Do not remove the ground prong from
the power cord plug.
ATTENTION
After connecting the power supply cord (or plug) to the outlet, wait 2 or 3 hours before you put food into the
appliance. If you add food before the appliance has cooled completely, your food may spoil.
Tips for energy saving
• Do not place the appliance near cookers, radiators or other heat sources. If the ambient temperature is
high, the compressor will run more frequently and for longer, resulting in increased energy consumption.
• Ensure that there is sucient ventilation at the base of the appliance, on the sides of the appliance and at
the back of the appliance. Never cover ventilation openings.
• Please also observe the spacing dimensions in the chapter “Installation”.
• The arrangement of drawers, shelves and racks as shown in the illustration oers the most ecient use of
energy and should therefore be retained as far as possible. All drawers and shelves should remain in the
appliance to keep the temperature stable and save energy.
• To obtain a larger storage space (e.g. for large refrigerated/frozen goods), the middle drawers can be
removed. The top and bottom drawers and shelves should be removed last if necessary.
• An evenly lled refrigerator/freezer compartment contributes to optimal energy use. Therefore, avoid
empty or half-empty compartments.
• Allow warm food to cool before placing it in the refrigerator/freezer. Food that has already cooled down
increases energy eciency.
• Allow frozen food to defrost in the refrigerator. The coldness of the frozen food reduces the energy
consumption in the refrigerator compartment and thus increases the energy eciency.
• Open the door only as briey as necessary to minimise cold loss. Opening the door briey and closing it
properly reduces energy consumption.
• The door seals of your appliance must be perfectly intact so that the doors close properly and energy
consumption is not increased unnecessarily.
Bekijk gratis de handleiding van Kenmore 75625, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kenmore |
| Model | 75625 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 10098 MB |