Handleiding
Je bekijkt pagina 20 van 100
20
Installing the Water Line
Installing the Water Line
• Water line installation kits are available as an
addional accessory from your dealer or at a local
hardware store.
1. First, shut o the main water supply line and turn the
ice-maker o.
2. Locate the nearest cold water supply valve.
3. After connecting the water supply to the water valve,
turn your main water supply back on and ush several
gallons of water to clear the water supply line.
Cold water line
Pipe clamp
Shut off walve
Water line installation kit
Connecting the water supply to the
refrigerator water connector
• There are several items that you need to purchase
to complete this connection.
• You will nd these items sold as a kit at your local
hardware store.
4. First, close the main water supply and locate the
nearest cold water line.
5. Second, connect the water valve to the cold water
line.
6. Turn water valve on and check for any leakage.
7. When moving the refrigerator, you can hang the
power cord on the power cord hook.
Power cord hook
Water line
Water connector
Connecting the Water Line to A Drinkable
Water Source
• If you must repair or disassemble the water line,
cut o the plastic tubing to make sure you get a
snug, leak-free connection.
ATTENTION
• The minimum inlet water pressure: 276kPa(40psi)
.
• The maximum inlet water pressure: 689kPa(100psi).
• Connect to potable water supply only new hose-sets
supplied with the appliance are to be used and that old
hose-sets should not be reused.
Water connector
Water tube
Bekijk gratis de handleiding van Kenmore 75625, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kenmore |
| Model | 75625 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 10098 MB |