Kenmore 41202 handleiding
Handleiding
Je bekijkt pagina 40 van 44
EN - 39
11. AUTOMATIC FAULT WARNINGS AND WHAT TO DO
Your Washing Machine is equipped with a built-in fault detection system, indicated by a
combination of flashing wash operation lights. The most common failure codes are shown
below.
TROUBLE CODE POSSIBLE FAULT WHAT TO DO
E01
The door of your machine is not
shut properly.
Shut the door properly until you hear a click. If
your machine persists to indicate fault, turn off your
machine, unplug it and contact the nearest authorized
service agent immediately.
E02
The water pressure or the water
level inside the machine may
be low.
Check the tap is fully turned on. Mains water may be
cut-off. If the problem still continues, your machine
will stop after a while automatically. Unplug the
machine, turn off your tap and contact the nearest
authoorized service agent.
E03
The pump is faulty or pump
filter is clogged or electrical
connection of the pump is faulty.
Clean the pump filter. If the problem persists, contact
the nearest authoorized service agent. (*)
E04
Your machine has excessive
amount of water.
Your machine will discharge water by itself. Once
the water has drained, turn off your machine and
unplug it. Turn off the tap and contact the nearest
authoorized service agent.
(*) See the chapter regarding maintenance and cleaning of your machine.
Bekijk gratis de handleiding van Kenmore 41202, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kenmore |
| Model | 41202 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 3428 MB |
