Keenetic Roamer 4G KN-5110 handleiding
Handleiding
Je bekijkt pagina 2 van 56
2
For technical support and other
information, please visit
support.keenetic.com
Installing the SIM Card
and Battery
To use your Keenetic Roamer 4G
(hereinafter ‘Mobile Hotspot’, ‘Keenetic
device’), you need to install a valid,
activated nano-SIM card with a data plan
from your mobile operator. Use a SIM
card without a PIN for quick setup.
Open the back cover. Gently slide and
lift the hinged metal SIM card slot
cover. Insert the SIM card into the slot
as shown on the device label. Close the
SIM card slot cover and slide it back
to lock it in place. Install the battery and
close the back cover.
Quick Start Guide
4G Mobile Hotspot
with Wi-Fi 6
KN-5110
Power i Select j
UPDATE
WiFi CFG
ABOUT
Back
WiFi CFG
Wi-Fi: Roamer123
Pass: 12345678
Back
Power i
4G
13:05
Mobile Operator
26.48 MB Used
0.3Mbps1.5
2
Connecting to the
Internet via Wi-Fi
Press and hold the Power Button i
until a welcome message is displayed.
From the Mobile Hotspot home screen,
press the Select Button j and then
the Power Button i to display the
Wi-Fi settings. Use the Wi-Fi network
name (Wi-Fi) and password (Pass)
displayed on the screen to connect
to your Mobile Hotspot. Alternatively,
you can scan the QR code
to automatically connect via Wi-Fi.
If other messages appear on the home
screen, please refer to the Frequently
Asked Questions section below.
Connecting via USB
Roamer 4G supports USB tethering.
This allows your computer or Keenetic
router with a USB port to use the
mobile network directly through a USB
connection, with no drivers required.
ENGLISH
KEENETIC
ROAMER
Bekijk gratis de handleiding van Keenetic Roamer 4G KN-5110, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Keenetic |
| Model | Roamer 4G KN-5110 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16618 MB |
