Kathrein UFO 102 handleiding
Handleiding
Je bekijkt pagina 41 van 53
UFOpro User Guide
3
UFX 150/4 >Output
For the Output, both models have direct IP output and multiplexing, but only UFX 150/4 has RTMP
output settings.
This feature is specifically for single program encoding and IP output directly. Outputting in this way
will not occupied baseboard multicast bandwidth.
If you want to use IP output channel in the encoder module and the baseboard IP module at
the same time, you should avoid a multicast IP address conflict. If there are two same IP addresses
enabled meantime, all the multicast videos will be affected.
Destination IP Address and Destination Port: Using for multicast IP addresses or unicast IP
addresses and ports.
Enable Destination MAC: Generally, you do not need to enable this option. This is reserved
for exceptional cases where the unicast stream cannot be received with unicast IP addresses.
You can enable destination MAC and streaming out by setting Destination MAC.
To use Multiplexing mode on service level
1. Click on the pencil icon . There will always be a Base Board selection for the IP output and
other Output options depending on the modules inserted.
2. Select the correct Output and Channel you want to output the Service to.
Bekijk gratis de handleiding van Kathrein UFO 102, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kathrein |
| Model | UFO 102 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9971 MB |