Kathrein UFO 102 handleiding
Handleiding
Je bekijkt pagina 10 van 53
UFOpro User Guide
8
4 Web GUI
4.1 Web GUI Overview
4.1.1 Connect the Management Port
Factory network settings of the Management Port:
• IP address 192.168.1.10
• Subnet Mask 255.255.255.0
• Gateway 192.168.1.254
Take the following steps to access the Web GUI in a browser.
• Connect laptop/computer to UFO 101 management port directly.
• Set the IP address of the laptop/computer in the same network segment with the UFO
101Baseboard. UFO 101 will occupy up to 7 IP addresses if it’s fully loaded as each module
has its own IP address including the baseboard.
Please avoid possible IP address conflict
between management PC and UFO 101 unit.
• Check the physical connection by ping command.
UFO 101 has an embedded gigabit switch inside the chassis. You can use it as a switch with
other devices together. The four network ports are respectively used for managing and streaming.
Bekijk gratis de handleiding van Kathrein UFO 102, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kathrein |
| Model | UFO 102 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9971 MB |