Kali Audio IN-8 v2 handleiding
Handleiding
Je bekijkt pagina 15 van 17
KALI AUDIO IN-Series 2nd Wave Studio Monitor User’s Guide
15
First Time Setup
• Before you plug the speaker in, make sure that the power switch is in the OFF position
• Plug the speaker in
• Connect audio cables
◊ If you’re connecting RCA, make sure that dip switch #8 is switched UP to the ON posi-
tion
◊ If you’re connecting XLR or TRS, make sure that dup switch #8 is switched DOWN to the
OFF position
◊ Do not connect more than one audio cable to the speaker at the same time.
• Turn the volume knob counter clockwise as far as it will go
• Turn the speaker on
• Start playing material from your playback device at a low volume
• Slowly turn the volume knob clockwise to the center detente, -0 dB position. Make sure you hear what
you’re playing
• Set the boundary EQ for your application. Refer to page 12 above.
• Repeat these steps for every speaker you’re using.
• Sit in your listening position, and turn the volume up on your playback device to the desired level
• Enjoy your new studio monitors!
Climate Considerations
The IN-series studio monitor’s enclosure is made of MDF wood and wrapped in vinyl, which is sensitive to
heat and humidity. The product should be kept and used in a climate-controlled environment. Exposure to
direct sunlight, moisture, or consistent humidity above 65% may cause the vinyl to peel and wrinkle. Addi-
tionally, do not set anything on top of the speakers, as this can cause discoloration or warping of the vinyl.
This is not covered under warranty.
Bekijk gratis de handleiding van Kali Audio IN-8 v2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kali Audio |
| Model | IN-8 v2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2062 MB |
