Kaiser S 60 U 88 XL ElfEm handleiding
Handleiding
Je bekijkt pagina 12 van 84
12
EN
Disconnecting from water supply and
sewerage
To disconnect the Aqua-
Stop inlet hose, cut off
water supply by turning off the faucet, screw out
the nut of the safety inlet hose which adjusts it to
the faucet.
P
ut the hose into the special storage compartment
at the back of the dishwasher.
I
n case the free end of the hose is put directly into
the sink, pay attention to the following:
If the sink is mounted at the height of 100 cm from
the floor, the excess water cannot be drained
directly into the sink.
T
o drain the excess water from the hose in this
case, you need a pail or any other suitable
container which should be put below the sink at
the side of it.
INSTALLATION
Place the dishwasher close to the water supply
and sewerage inlets as well as to the electrical
outlet.
Align the dishwasher by turning (screwing in or
out) the adjusting screw 1
at the back, in the
middle of the appliance. In any case, the
dishwasher must not be tilted more than 2 °.
The dishwasher is equipped with water inlet and
drain hoses which can be fixed on the right or on
the left to enable proper installation.
825
600
80
100
450*
600*
*
5
Bekijk gratis de handleiding van Kaiser S 60 U 88 XL ElfEm, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kaiser |
| Model | S 60 U 88 XL ElfEm |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 14362 MB |
Caratteristiche Prodotto
| Apparaatplaatsing | Semi-ingebouwd |
| Soort bediening | Buttons, Touch |
| Ingebouwd display | Nee |
| Gewicht | 41100 g |
| Breedte | 598 mm |