Handleiding
Je bekijkt pagina 10 van 60
10
EN
Attention! The manufacturer declines all
responsibility for damage or injury if the above
instructions and normal safety precautions are
not respected
MOUNTING OF THE LOGO PLATE
Mount a logo plate to the masking cover1 2 using the
attached fastening parts.
• Align the so that the mounting masking cover 2
holes are at the bottom.
• Install on the front side of the logo plate 1
masking cover by inserting its feet into the 2
mounting holes.
• Fix the inside the masking cover logo plate 1 2
using the supplied rubber spacers (if included),
tight the screws into the feet of the logo plate 1.
CONNECTING TO THE POWER NETWORK
Before connecting the oven to the mains power supply,
make sure that:
• The supply voltage corresponds to the
specifications on the data plate in the interior of
the device.
• The power network is grounded in accordance with
applicable laws and and regulations.
The according to the rules installed socket is a legal
requirement. The power cable should never reach a
temperature 50° C above ambient temperature at any
point along its length.
If the appliance is to be connected directly to mains
terminals, fit a switch with minimum aperture of 3 mm
between the contacts. Make sure that the switch is of
sufficient capacity for the power specified on the
appliance's data plate, and compliant with applicable
regulations. The switch must not break the yellow-
green earth wire. The socket or switch must be easily
reachable with the oven fully installed.
After connecting the power supply (according to the
conditions described above) you should check the
function of the lighting and the motor.
Attention! Failure to install the screws or wall
hanger in accordance with these instructions
may result in electrical hazards.
1
2
Bekijk gratis de handleiding van Kaiser AI 7418 Eco, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kaiser |
| Model | AI 7418 Eco |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 10442 MB |
Caratteristiche Prodotto
| Kleur van het product | Black, Stainless steel |
| Ingebouwd display | Nee |
| Gewicht | 25500 g |
| Breedte | 700 mm |
| Diepte | 600 mm |
