K&M 24615 handleiding

Handleiding

123456789101112131415161718192021222324252627/ 27

Afdrukken

Je bekijkt pagina 22 van 27

Lifting the load

✓ The stand is securely set up.

✓ The stand tube is in the lower end position.

✓ The clamping screws are tightened.

✓ If the load is within the range of movement of the crank, the extension tube must be free by

✓ approx. 100 mm before placing the load.

Lowering the load

✓ The stand is securely set up.

1 Place the load.

2 Loosen the clamping screw of the crankcase.

3 Turn the hand crank clockwise until the desired

3 height is reached.

4 Tighten the clamping screw.

1 Loosen the clamping screw of the crankcase.

2 Secure the hand crank with one hand and the

2 crankcase with the other. Lift the load slightly to

2 relieve the release button. To do this, apply pres-

2 sure to the crank in a clockwise direction.

3 Press the release button with your thumb.

4 Turn the hand crank anticlockwise and lower

4 the load.

5 Release the release button.

6 Tighten the clamping screw.

22

123456789101112131415161718192021222324252627/ 27

Bekijk gratis de handleiding van K&M 24615, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd