Jura Impressa XJ9 handleiding
Handleiding
Je bekijkt pagina 29 van 56
29
4 Permanent settings in programming mode
g T Turn the Rotary Switch until the program item ‘Product set-
tings (2/6)’
is displayed.
T Press the
‘One-off settings’ button.
‘One-off settings’
T Press the ‘Inactive’ button.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Product settings (2/6)’
O T Press the P button to exit programming mode.
‘Please select product:’
One-off settings cannot now be made during preparation.
In the program item
‘Product settings (2/6)’/ ‘product selector’ you
can make the following setting:
U
‘Active’
U
Product selector view is active and can be started by turning
the Rotary Switch g when the IMPRESSA is ready for use.
U
‘Inactive’
U
Product selector view is inactive.
Example:Proceed as follows to disable product selector view.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/6)’
g T Turn the Rotary Switch until the program item ‘Product set-
tings (2/6)’
is displayed.
T Press the
‘product selector’ button.
‘product selector’
T Press the ‘Inactive’ button.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Product settings (2/6)’
O T Press the P button to exit programming mode.
‘Please select product:’
Product selector view can now no longer by started by turn-
ing the Rotary Switch.
Enabling and disabling
product selector view
Bekijk gratis de handleiding van Jura Impressa XJ9, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Jura |
| Model | Impressa XJ9 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4227 MB |
