Jura Impressa XJ9 handleiding
Handleiding
Je bekijkt pagina 15 van 56
15
1 Preparing and using for the first time
You can find out what the water hardness is by using the Aquadur®
test strip supplied as standard.
T Hold the test strip briefly (for 1 second) under flowing water.
Shake off the water.
T Wait for about one minute.
T You will then be able to read the degree of water hardness
from the discoloration of the Aquadur® test strip and the
description on the packaging.
You can now adjust the water hardness.
The water hardness can be adjusted on a continuous scale between
1 °dH and 30 °dH.
Level Display German
Degree (°dH)
Degrees of general
hardness (°dGH)
Parts per
million (ppm)
Indicator Strip number
of ‘reddish’ fields
Not active – – – –
Very soft water <3 <3 < 53.4 None
Soft water > 4 > 4 > 71 1
Hard water > 8.4 > 8.4 > 150 2
Very hard water > 14 > 14 > 250 3
If you adjust the consistency of grind when the grinder is not oper-
ating, the grinder adjustment switch could be damaged.
T Only adjust the consistency of grind when the grinder is run-
ning.
You can adjust the grinder on a continuous scale to suit the degree
of roast of your coffee.
The consistency of grind is correct if the coffee flows regularly from
the coffee spout. In addition a fine, thick crema forms.
Example: Proceed as follows to change the consistency of grind
during the preparation of an espresso.
T Open the storage compartment cover.
T Place a cup under the coffee spout.
Determining the water
hardness
Adjusting the grinder
NOTICE
Bekijk gratis de handleiding van Jura Impressa XJ9, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Jura |
| Model | Impressa XJ9 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4227 MB |
