Handleiding
Je bekijkt pagina 8 van 42
Chapter 1: Read Me First
4 Pana 105D User Manual
1.6 Unpack the Pana
The Pana shipping container has a slide off top cover. The Pana is protectively wrapped in the bottom, base
container. The safest way to store and move the Pana display before installing it is in the shipping container.
The procedure for mounting the display, includes moving the unit, so after visual inspection you should put the
top cover back on and reattach the stabilizer snaps.
Figure 1.1: Pana packaging
1 Remove the cardboard stabilizer snaps
There are two stabilizer snaps on the front and back of the shipping container which hold the outer ship-
ping cover with the base unit. Remove them by pinching the inner bars together and pulling the stabi-
lizer snaps out.
2 Slide the outer shipping cover off
Sliding the outer shipping cover off requires one person at either end of the shipping container. Keeping
the cover level as you lift it off. Do not tilt the shipping container so the shipment monitors will still be
useful if you need to ship it again.
3 Remove the top foam padding
4 Remove the cardboard sheet which protects the screen
5 Remove the plastic wrapping
6 Fully removing the Pana from the base is only recommended when installing the Pana in its final
mounted position.
Using at least two people lift and slide the Pana out of the bottom base foam padding.
See Chapter 4, Pana105D Installation, on page 31 for guidance about mounting and installing the Pana.
Bekijk gratis de handleiding van Jupiter Pana 105, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Jupiter |
| Model | Pana 105 |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 7543 MB |
