Junker JB55X02ITE handleiding
Handleiding
Je bekijkt pagina 23 van 60
Water softening system en
23
Water
hardness
value °E
Hardness
range
mmol/l Setting LED A LED B LED C
9 - 20 Medium 1.2 - 2.9 1
21 - 26 Hard 3.0 - 3.7 2
27 - 62 Hard 3.8 - 8.9 3
A CB
Note:Set the water hardness determ-
ined on your appliance.
→"Setting the water softening sys-
tem", Page23
With a water hardness of 0 - 8°E
you can dispense with special salt for
dishwashers and switch off the water
softening system.
→"Switching off the water softening
system", Page24
10.2 Setting the water soften-
ing system
Set the water hardness on your appli-
ance.
1. Determine the water hardness and
the appropriate setting value.
→"Overview of water hardness set-
tings", Page22
2. Press .
3. To open the appliance settings,
press for 3 seconds.
a flashes.
4. Press repeatedly until the right
water hardness has been set.
A CB
0, 1, 2 or 3 LEDs will light up ac-
cordingly.
→"Overview of water hardness set-
tings", Page22
The factory setting is level 1 (LED
A →Page16).
5. To save the settings, press
for 3 seconds.
10.3 Special salt
You can use special salt to soften
water.
Adding special salt
If the special salt refill indicator lights
up, add special salt to the dispenser
for special salt just before the pro-
gramme starts. The consumption of
special salt depends on the water
hardness. The higher the water hard-
ness, the greater the consumption of
special salt.
ATTENTION!
Detergent may damage the water
softening system.
▶ Only fill the dispenser of the water
softening system with special dish-
washer salt.
Bekijk gratis de handleiding van Junker JB55X02ITE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Junker |
| Model | JB55X02ITE |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 5006 MB |