Jung TKASVAL114WW handleiding

Handleiding

123456789101112131415161718192021222324/ 24

Afdrukken

Je bekijkt pagina 18 van 24

18

Setting parameters with DIP switches

1. Select parameter

Set DIP switches 1, 2 and 3, that the parameter to be

changed has been selected.

1 2 3

2. Set value

Set switches 4, 5 and 6 in accordance with the

desired value.

4 5 6

3. Activate parameter mode

Set switch 8 to ON.

Nameplate illumination flashes quickly

(0.125 s On / 0.125 s Off).

4. Apply parameter

Pressing any bell button saves the desired value for the

parameter being set. An acknowledge tone sounds as

a confirmation.

5. Deactivate parameter mode

Set switch 8 to OFF.

Nameplate illumination: ON.

Note:

To set additional parameters, repeat steps

1 – 5. Otherwise continue with step 6.

6. Set the original button layout

After setting the parameters, reset the DIP switches

according to the button layout.

123456789101112131415161718192021222324/ 24

Bekijk gratis de handleiding van Jung TKASVAL114WW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Bewakingscamera