Jung TKASVAL114WW handleiding

Handleiding

123456789101112131415161718192021222324/ 24

Afdrukken

Je bekijkt pagina 17 van 24

17

Parameters

Settable parameters

Factory

pre-setting

Can be set with

DIP switch

Can be set with

the commissioning

software.

AS-address not blocked x

Communication time 60 s x x

Door release time 3 s x

Acknowledge tone type Standard x

Acknowledge tone volume medium x

Voice volume medium x

Programming block on/off off x

Light switching function via the door release

function of the indoor stations on/off

off x

Talking only after incoming door call off x

Switching threshold for the automatic light

function dependent on outdoor light

medium x

Setting and blocking AS-address

For operation with multiple outdoor stations, a separate AS-address (0 – 63) must be set

for each outdoor station. This produces an unambiguous assignment of the outdoor sta-

tions.

Setting and cancelling a programming block

When a programming block is set, no bell button programming can be performed. The

programming block must be reset before reprogramming.

At the same time, when the programming block is cancelled, the light switching function

and talking only after incoming door call are cancelled and the acknowledge tone is reset

to the factory pre-setting.

Light switching function

Allows double assignment of the door release button to the indoor stations. When the light

switching function is activated, door released is only actuated when existing communica-

tion is active. Without existing communication the light will be switched on. Thus the func-

tion button of the indoor stations remains available for other functions.

Automatic light switching

Brightness-dependent light switching when the bell button is triggered.

The function can be deactivated, adjusted in 6 brightness levels or switched independent

of the brightness.

Light switching

The light can be switched on manually via non-programmed bell buttons or the function

button of the indoor stations.

In the state of delivery the function button of the indoor station is assigned with this func-

tion.

Nameplate illumination

Brightness-independent switching of the nameplate illumination

The state at delivery is always ON.

123456789101112131415161718192021222324/ 24

Bekijk gratis de handleiding van Jung TKASVAL114WW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Bewakingscamera