Jung SITMA5073 handleiding
Handleiding
Je bekijkt pagina 53 van 140
Siedle custom-t door loud-
speaker
Functional
Calling, speech and video functions
between door station and the
connected bus indoor devices with
colour display.
Audio and video privacy of existing
calls from other bus indoor devices is
assured. Door release button for the
door release function, light button
for the light switching function.
Pressing the monitor button will
show the camera picture from the
door station which placed the last
door call. This function is only pos-
sible if no call exists.
Connection of a storey call button
(ERT) for calling from an apartment
door. Ringtones can be selected for
calls from the front door, apartment
door or internal calls.
Connection of other bus indoor
devices with colour display when
looping through from one device to
the next.
Other bus door loudspeakers with
video are connected with bus
video distributors BVVU650-… or
BVVS650-…
Supplementary functions
• Internal speech communication
between bus indoor devices is only
possible internally within the same
line.
• Connection of bus telephones
AIB150-…/BTS/BTC/BFC850-… or
devices for switching and control
functions via bus audio decoupler
BAA650-…
For more information, see
page68
• Switching and control functions
are possible with the bus switching
modules BSM/BSE/BEM650-…,
feedback to the deluxe bus indoor
devices can be programmed.
For more information, see
page123
• Bus secondary signal unit
BNS750-… possible.
For more information, see
page132
• Parallel door and storey call
Up to 8 bus indoor devices with
colour display can be called simulta-
neously via one call button. From the
second bus telephone VIB150-…/
BTSV/BTCV/BFCV850-… each
device must be additionally supplied
at terminals +M/–M.
Only possible within a line.
• Selective dialling of the door
station possible via additional free
buttons.
• Video memory function
possible with bus indoor devices
BVPS/BVPC850-… and BTCV/
BFCV850-…, additional installation
required (for BTCV/BFCV850-…).
Remarks
a) The NG602-… (12VAC, 1.6A)
can also provide a supply for illu-
mination of existing call buttons.
A voltage of 12VAC, max.1A
is available for illumination. With
a higher current consumption, an
additional transformer must be used.
b) Door release/light contact load
in the bus video line rectier
BVNG650-… max.15VAC,
30VDC, 2A.
c) Door release 12VAC, use at least
20Ohm (e.g. TÖ615-…).
For more information, see
page126
d) Conductor length bus indoor
device – storey call button ERT max.
50m.
e) When using the video memory
module, the bus telephone BTCV/
BFCV850-… must be supplied
by an additional direct voltage
(20–30VDC, 350mA). VNG602-…
can be used for this purpose.
For more information, see
page128
f) When using camera CE950-…, a
VNG602-… is required at this point.
The door release must then be sup-
plied via an additional TR603-… .
53
Bekijk gratis de handleiding van Jung SITMA5073, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Jung |
| Model | SITMA5073 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13662 MB |
