Jung SITMA5073 handleiding
Handleiding
Je bekijkt pagina 25 van 140
BSM 650-02
Bus switching module in 3-grid
housing. 4 integrated relays, each
with a potential-free working con-
tact. Actuation via the call buttons
of the bus telephones or light button
at the door station. Relay functions
as a timer between 0.4seconds
and 12seconds. Max. contact load
15VAC, 30VDC, 2A. 12VAC
supply required, 250mA.
BVD 650-0
The bus video demodulator in a
6-grid switch panel housing converts
the video image at the bus cores
of the In-Home bus: video into a
standard FBAS video signal.
The converted video image can
subsequently be transmitted to any
video monitor or any TV with a
suitable input or can be further pro-
cessed in a video system.
BSE 650-0
Bus switching unit for mounting in
70mm boxes. LED for status display
and programming mode button.
Actuation via the call buttons of the
bus telephones or light button at the
door station. The relay functions as a
button, switch or timer for max. 19
minutes 59 seconds. Max. contact
load 250 V AC/6 A.
BEM 650-0
Bus input module for mounting in
a 55 junction box with an input for
tripping switching functions/trans-
mitting messages at the In-Home
bus.
Activation possible via potential-free
contact or 4–30VDC, 10mA.
For connection of BSM/BSE/
BEM650-… to the In-Home
bus: Video, the BAA650-… is
required.
BIM 650-02
Bus interface module in switch
panel housing, used for connection
between Siedle Vario bus and Siedle
In-Home bus.
It is always required when a
bus door loudspeaker has to be
equipped with a COM or DRM and
call controller RC602-… in addition
to or instead of direct call buttons.
Switching, control
25
Bekijk gratis de handleiding van Jung SITMA5073, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Jung |
| Model | SITMA5073 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13662 MB |
