Jung SITMA5073 handleiding
Handleiding
Je bekijkt pagina 103 van 140
Internal call
2 Lift the receiver at the rst bus
telephone you wish to enable for
internal calls. The programming
mode tone is audible.
5 Hold the light button down for
4seconds. The acknowledgement
tone is audible. Do not replace the
receiver.
3 Hold the light button down for
4seconds. The acknowledgement
tone is audible. Do not replace the
receiver.
6 A speech connection now exists
between the two bus telephones.
4 Lift the receiver at the second
bus telephone you wish to enable
for internal calls. The programming
mode tone is audible.
You wish a bus telephone to be
able to call and communicate
with another bus telephone in the
system.
An internal call for the BVPC850-…
is programmed at the PC using
the bus programming software
BPS650-…
1 Switch on the programming mode.
At the BNG/BVNG650-…, press the
programming mode button briey.
The LED1 ashes in a 2-second
rhythm to indicate that the program-
ming mode is active.
Tel. 1Tel. 1
Tel. 2Tel. 2
103
Bekijk gratis de handleiding van Jung SITMA5073, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Jung |
| Model | SITMA5073 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13662 MB |
