Jung FMGCR1700 handleiding
Handleiding
Je bekijkt pagina 59 van 94
+ –
data + DC12 V
L
DC 12 V
N
max. 32
modules
DC-
DC+
BUS-
BUS+
DC-
DC+
BUS-
BUS+
DC-
DC+
BUS-
BUS+
DC-
DC+
BUS-
BUS+
A1 L
A2
A1
L
A1
A2
A3
A4
A5
A6
A7
A8
L1
L2
L3
N
PE
M
Prog
Prog
Prog
Prog
Prog
Prog
1.
2. 3.
4.
5.
6.
1. 12 V DC / 2 A power supply
2. DRA receiver module
3. Blind actuator, 1-gang DRA
4. Switching/blind actuator, 8/4-gang DRA
5. Switching actuator, 1-gang DRA
6. Additional eNet antenna
DEVICES FOR INSTALLATION
IN DISTRIBUTORS
Electrical distributors are the
ideal installation location for elec-
tronic switching devices, because
a) this is where the power supply
lines enter the system, and b) this
is where the cables for the final
electric circuits collectively exit
the system. Main and sub-dis-
tributors can be accessed and
operated at any time, and can be
expertly and conveniently wired by
specialist tradesmen.
1. SETUP
Because electrical distributors
shield radio waves with their often
high metal content (steel doors,
DIN rails, neighbouring devices), a
modular concept that separates
actuator systems and wireless
communication from one another
was pursued. A DRA installation is
therefore made up of application
modules, a power supply and a
DRA receiver module or the eNet
server.
The application modules commu-
nicate in the distributor via a wired
bus. A maximum of 32 modules
can thus be supplied with power
and information. The connection to
the wireless networking solution is
established via the receiver mod-
ule or the eNet server.
These two devices not only have an
internal antenna, but also a con-
nection for an external antenna
too. The latter enables wireless
communication for distributors
with metallic casings and is in-
stalled outside of the control cabi-
net. For better receiver character-
istics, the external antenna (eNet
or WLAN) should be placed on a
metallic surface.
The connectible modules provide
all standard applications. The mod-
ules are networked with transmit-
ters and can be parametrised to
suit user requirements.
The application modules therefore
contain operating elements such
as indicator LEDs, operating but-
tons and a programming button.
The DRA receiver module or the
eNet server are connected to
the application modules with a
connection cable, e. g. J-Y-(St)-Y
2 × 2 × 0.8 mm. This connection ca-
ble can be wired in a line, star or
tree shape.
eNet DRA installation with DRA receiver module
119118 eNet _ Devices for installation in distributors
Bekijk gratis de handleiding van Jung FMGCR1700, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Jung |
| Model | FMGCR1700 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 24644 MB |
