Juki MS-1261A-DWS handleiding
Handleiding
Je bekijkt pagina 82 van 88
– 79 –
S042 Number of stitches to be sewn until the sewing ma-
chine stops after the absence of material is detected
and the chain-o thread cutter is actuated
100 100 100 100
S043 Selection of the chain-o thread cutter operation by
depressing the back part of pedal
ON ON ON ON
S051 Needle bar stopping position Stop with
the needle
down
Stop with
the needle
down
Stop with
the needle
down
Stop with
the needle
down
S052 Speed limiting value after the detection of the ab-
sence of material
1500 1500 1500 1500
S053 Number of stitches for delaying turning-ON of the
needle cooler
0 0 0 0
S061 Part number - - - -
S062 Process - - - -
S063 Comment - - - -
S068 Number of stitches to be sewn before the cloth puller
starts running on the multi-layered portion of material
8 8 8 6
S069 Number of stitches at which the cloth puller runs on
the multi-layered portion of material
8 10 8 8
S070 Cloth pulling amount when the cloth puller runs on
the multi-layered portion of material
3.5 3.5 3.5 3.1
S071 Cloth puller pressure when the cloth puller runs on
the multi-layered portion of material
-30 70 10 65
S072 Cloth pulling amount when the absence of material
is detected
3.5 3.5 3.5 3.5
S073 Cloth puller pressure when the absence of material
is detected
120 70 120 80
S074 Number of stitches to be sewn before the cloth puller
starts running on the top end of material
9 8 9 9
S075 Number of stitches at which the cloth puller runs on
the top end of material
5 6 5 5
S076 Cloth pulling amount when the cloth puller runs on
the top end of material
3 3.5 3 3
S077 Cloth puller pressure when the cloth puller runs on
the top end of material
100 30 100 100
S078 Presser foot pressure when the cloth puller runs on
the multi-layered portion of material
150 100 100 80
* When you use pattern data Nos. 1, 2 and 3, set "U231 Not-use of the cloth puller presser solenoid valve output"
to "0 (zero)".
* When you use pattern data No. 4 (for medium-weight materials), set "U231 Not-use of the cloth puller presser
solenoid valve output" to "1". The cloth puller presser cylinder is placed in "OFF".
When the cloth puller presser cylinder is placed in "OFF", set the cloth puller pressure (S007, S016, S071 and
S077) to "65" or more on the operation panel. If not, the cloth puller can oat.
* "S061: Part number", "S062: Process" and "S063: Comment" have not been factory-set at the time of shipment.
Give names to the sewing patterns that the user can understand with ease (ex. "Heavy", "Extra heavy", etc.)
Bekijk gratis de handleiding van Juki MS-1261A-DWS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Juki |
| Model | MS-1261A-DWS |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 11719 MB |
