Juki MF-3580 handleiding
Handleiding
Je bekijkt pagina 78 van 440
− 6 −
1
2
State that cloth puller cover and handwheel are
installed
2
1
7. Installing the handwheel
8. Installing the thread stand
• Install handwheel
2
with three setscrews
1
supplied
with the machine as accessories.
(It is not necessary when MT03 is installed.)
• Tightening torque of the screw is 2.5 to 3 N•m.
1) Assemble the thread stand as shown
in the fi gure and install it in the hole of
the table.
2) Tighten nuts
1
to such an extent that
the thread stand does not move.
3) When using power supplied by the
overhead power line, pass the power
supply cord through thread stand
2
.
6. Installing the cloth puller cover
• Install top feed cloth puller cover
2
with two
setscrews
1
supplied with the machine as
accessories.
• Tightening torque of the screw is 2.5 to 3 N•m.
Turning the sewing machine by hand, per-
form positioning of the cover so that the
cover does not come in contact with the
sewing machine.
1
2
Bekijk gratis de handleiding van Juki MF-3580, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Juki |
| Model | MF-3580 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 79694 MB |
