Juki MF-3580 handleiding
Handleiding
Je bekijkt pagina 77 van 440
− 5 −
4. Installing the presser lifting lever
5. Installing the thread trimming knife
At the beginning, insert boss section
A
of presser lifting
lever
1
into bracket
2
.
In this state, fi x it on thread tension base
7
with setscrew
3
.
Next, pass connecting link
5
as shown in the fi gure and
insert O-ring
6
into the both ends of it.
Finally, fi x it with setscrew
4
.
Put bottom thread trimming knife
1
on top thread trimming
knife
2
, insert them into knife cover
3
, and install them
with two screws
4
as shown in the fi gure.
When installing the knives, perform the
work while taking care of the cut of fi ngers.
(Blade section) Dangerous
places of cut from the knives
CAUTION
:
1. Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of
the sewing machine.
2. Do not touch your fi ngers or hands to the blade section of knife. so as to prevent fatal accidents.
3.
Perform the adjustment work by the maintenance engineers who are familiar with the sewing machine
and trained for the safety so as to prevent accidents caused by unfamiliarity or wrong adjustment.
3
2
6
1
5
4
1
7
A
Apply the grease (Part No.: 40013640)
supplied with the unit to the sliding parts
encircled with (four locations) at least
once every three months.
6
2
1
3
4
Bekijk gratis de handleiding van Juki MF-3580, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Juki |
| Model | MF-3580 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 79694 MB |
