Joy-it RB-P-XPLR-SET handleiding

Niet gecategoriseerd

Joy-it

37 pagina's

PDF beschikbaar

Handleiding

. WEATHER STATION

Dive into the second project of our electronics adventure where you create your own weather station! This project combines the use of a UV sensor with the

DHT11 temperature and humidity sensor to not only give you insight into the current weather conditions, but also measure the UV radiation at your location.

All this information is clearly displayed on the colorful TFT display, so you can see the weather and UV radiation at a glance.

UV-SENSOR: The UV sensor is a small component that helps us to measure the invisible ultraviolet

(UV) rays of the sun. UV rays are the part of sunlight that is invisible but can have an impact

on our skin and health. Think of sunburn or tanning of the skin - both are caused by UV rays.

At its core, the sensor contains a material that reacts to UV radiation. When UV rays hit this

material, the sensor changes its electrical resistance. This change is converted by the sensor

into a signal that we can measure and read out. With the help of the Raspberry Pi Pico, we can

then convert this signal into a value that indicates how strong the UV radiation currently is.

First connect the UV sensor to your Raspberry Pi Pico using the enclosed cables. Although you can of course

also plug it onto the breadboard, you are much more flexible here with a direct cable connection.

ATTENTION! For this project, it is necessary to set the switch for

the RELAY to OFF and the switches for the TFT DISPLAY and the

DHT sensor to ON.

RASPBERRY PI PICO UV-SENSOR

GND

GP28

3V3

GND

OUT

VCC

Bekijk gratis de handleiding van Joy-it RB-P-XPLR-SET, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.