Jolin Krono handleiding

Handleiding

1234/ 4

Afdrukken

Je bekijkt pagina 3 van 4

3

7. Polyrhythm (X:Y Ratios & Sum)

• Group A: Outputs 2A–5A generate polyrhythms with X:Y ratios (Default: 3:2, 5:3, 7:4, 9:5). Output

6A is the logical OR sum of 2A–5A triggers.

• Group B: Outputs 2B–5B generate other polyrhythms (Default: 4:3, 6:5, 8:7, 10:9). Output 6B is

the logical OR sum of 2B–5B triggers.

• Swap: Swaps the X:Y ratio sets between groups.

8. Logic Gates

• Concept: Combines outputs from Default mode using logic operations.

• Group A: Outputs 2A–6A are the XOR of corresponding Group A and B Default mode outputs

(e.g., 2A = 2A_default XOR 2B_default).

• Group B: Outputs 2B–6B are the NOR of corresponding Group A and B Default mode outputs

(e.g., 2B = NOT (2A_default OR 2B_default)).

• Swap: Inverts logic gates between groups (Group A becomes NOR, Group B becomes XOR).

9. Phasing

• Concept: Group B clocks run at a slightly offset frequency from Group A.

• Group A (Outputs 2A–6A):

 2A follows the base tempo.

 3A–6A generate derived clocks (x2, /2, x3, /3) from the base tempo.

• Group B (Outputs 2B–6B):

 2B follows an offset base tempo.

 3B–6B generate derived clocks (x2, /2, x3, /3) from the offset base tempo.

• Swap: Cycles through three Group B frequency deviation levels (small, medium, large).

10. Chaos Simulated (Lorenz Threshold Crossings)

• Concept: Generates triggers based on threshold crossings in a chaotic Lorenz system.

• Group A (Outputs 2A–6A): Triggers when the Lorenz variable X crosses predefined thresholds.

• Group B (Outputs 2B–6B): Triggers when Lorenz variables Y/Z cross predefined thresholds.

• Split Triggers: A trigger is emitted only every N threshold crossings.

• N (chaos current divisor) is shared across all outputs 2–6.

• Swap: Decreases N. Resets to default if minimum is reached.

I/O

Function

Control

Main Effect

Tap Tempo

TAP button

Average the last 3 valid intervals → New base

tempo (1A and 1B)

Select Mode

Press TAP button for 1sec + click

MOD b

utton X times + click TAP

button

Set operational mode to X

Swap Groups

MOD button short or MOD input

Invert patterns between Group A ↔ Group B

External Clock

TAP input

Sync new base tempo

TAP LED

Status

Blinks = Active Mode Number

Steady = Select Mode

MOD LED

Auxiliary

Blinks on updates of base tempo, mode change,

swap

Base Clock

OUT 1A, OUT 1B

Unmodified base tempo (1ms)

Group A Clocks

OUT 2A - OUT 6A

Mode-dependent patterns (1ms)

Group B Clocks

OUT 2B - OUT 6B

Mode-dependent patterns (1ms)

1234/ 4

Bekijk gratis de handleiding van Jolin Krono, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd