JMAZ Electro Panel W8 handleiding
Handleiding
Je bekijkt pagina 11 van 56
10
apply to your specific model. Please contact support for more information.
Exterior Maintenance: Inspect the exterior every 30 days. Ensure the unit is powered
off and disconnected. Check the optics for any obstructions on the lens, and clean
both the optics and chassis as needed. Schedule future maintenance based on your
initial findings, keeping in mind that regular exterior maintenance is required, even if
the luminaires are not in use due to their outdoor location. Applying a durable wax to
the chassis is recommended to prevent contaminant buildup. Inspect power and data
lines for signs of contamination or corrosion, and periodically reapply dielectric grease,
especially in coastal environments. If any contamination or corrosion is found,
thoroughly clean and/or replace connectors, then reapply dielectric grease. This
maintenance should typically be performed annually or whenever an opportunity
arises. To prevent issues, it is recommended to replace both vent valves annually, as
the membrane can become contaminated or clogged, leading to improper venting of
humidity within the luminaire. Inspect all mounting hardware as a precaution.
Interior Maintenance: Inspect the interior monthly while the unit is powered off.
Inspect and clean the zoom/focus mechanism. Lubricate linear bearings with Krytox oil
as needed, and check belts for wear.
Inspect and manually rotate all rotating effect wheels, noting any resistance.
Inspect all remaining rotating belts for wear.
Inspect, clean, and check the rotation and connections of all fans.
Inspect the CMY module, manually move flags, and check for resistance. If necessary,
clean guide rods and reapply a thin layer of moly lube.
Clean the interior with low-volume compressed air and optics before reassembling
head covers.
While the base has limited moving parts, inspect the pan belt for wear. Always perform
an IP test after removing any cover.
There's no fixed replacement schedule for parts like belts, stepper motors, PCBs, or
LEDs. Replace them only when necessary. Cooling fans should be replaced
proactively at 10,000 hours to maintain optimal cooling and protect internal
components. In case a full-service breakdown is needed, please reach out to us at:
support@jmazlighting.com.
Important: Only the fixtures are IP65 rated. The flight case and charging bases are
not designed for outdoor use or exposure to moisture.
This unit contains no user-serviceable parts. Attempting repairs will void the warranty.
Modifications or disregard of safety instructions will also void the warranty.
Never look directly into the light source. Doing so can cause serious eye damage,
including blindness. Sensitive individuals may experience epileptic seizures.
Bekijk gratis de handleiding van JMAZ Electro Panel W8, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | JMAZ |
| Model | Electro Panel W8 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6905 MB |
