Jetson Volt X handleiding
Handleiding
Je bekijkt pagina 23 van 69
21
YOU WILL NEED THE PHILLIPS-HEAD SCREWDRIVER.
1. HOLD THE PRE-INSTALLED NUT(SIZE M5) ON THE FRONT FORK SUPPORT STEM STEADY. LOOSEN AND REMOVE THE
PRE-INSTALLED BOLT(SIZE M5 X 30MM) BY TWISTING IT OUT COUNTERCLOCKWISE WITH THE PHILLPS-HEAD SCREWDRIVER.
SET THE BOLT AND NUT ASIDE.
2. POSITION THE FRONT FORK (B) INTO THE FRAME (A) SUCH THAT THE FRONT LEG OF THE FRONT FORK IS IN THE FORK
CHANNEL AND THE BACK LEG SLIDES ONTO THE FRONT FORK SUPPORT STEM. ENSURE THAT THE HOLES ON THE SIDES OF
THE BACK LEG ARE ALIGNED WITH THE HOLES ON THE SIDES OF THE FRONT FORK SUPPORT STEM.
2.4
Installing the Front Fork
FRONT FORK (B)
FRAME (A)
FRONT FORK
CHANNEL
FRONT FORK
SUPPORT STEM
2
1
PHILLIPS-HEAD
SCREWDRIVER
FRONT FORK
CHANNEL
NUT
BOLT
Bekijk gratis de handleiding van Jetson Volt X, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Jetson |
| Model | Volt X |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9502 MB |
